1. Construction Panels
Wilson LT Reinforced Tri-laminate - 100% recyclable Polyproplene with non-directional cellular center, 7mm, talc-filled. Thermoformed center layer is laminated to outer layer hermetically sealing air loaded cells. When third layer is laminated to the opposite side the resulting three dimensional sheet is stronger and lighter weight than laminated plywood or extruded polyethylene sheets. Read more on the Wilson LT

We also offer ABS-clad plywood as well aluminum skinned plywood. These options include a protective covering; .040 " high impact industrial grade pressure-laminated to 1/4", 3/8", or 1/2" solid-core #1 grade plywood.

2. Angle
Extruded aluminum; 6063 alloy; heat-treated to T-6; 1.1875" ; machine-riveted to case walls every three inches.

3. Valance
Exceptionally deep tongue-and-groove closure; extruded aluminum 6063 alloy grade; heat treated to T-5; with oblong channel in goove to secure optional neoprene gasket; both tongue and groove have full inner leg for superior strength.

4. Hinge
Stainless steel; continuous piano hinge; riveted through both inner and outer leg of double-walled valance every two inches.

5. Ball Corners
14-Gauge plated steel, stackable (top corners have depression to accept rounded bottom corner for secure nesting when stacked).

6. Latches
Recessed; plated steel; positive action butterfly twist style. Does not require valance to be broken. The latch spans tongue-and-groove to eliminate dust and moisture and preserve the integrity of the case.

7. Handles
Recessed; plated steel; spring loaded 3/4" diameter rubber grip sleeves. Deeper dish in handle located on lid (when applicable prevents handle from interfering with stacking ability.

8. Rivets
Machine-driven; plated steel; spaced a maximum of 3" apart.

Wilson Case reserves the right to change color shades and case hardware commensurate with ATA-300 specifications without notice.

Wilson Case offers a full selection of hardware options not shown here. See more options now or let us know your special needs by contacting us.